Re: [PATCH tty v1 00/74] serial: wrappers for uart port lock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-09-15, Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:
> Would this also be useful to enable printing to console while under
> port's lock (by postponing the output until the lock is released)?
>
> E.g., 8250_dw.c has had this commented out since the dawn on time:
>         /*
>          * FIXME: this deadlocks if port->lock is already held
>          * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
>          */

Yes, this will fix such issues. However, only for consoles that are
converted to the new NBCON console type.

Good news, the 8250 driver will be the flagship driver that is converted
as part of the rework. So this particular issue will be solved then. I
will try to remember this so that I can remove the FIXME in the series.

Thanks for mentioning it.

John




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux