This patch series adds the relevant phy and controller DT configurations for enabling USB2 host mode support on IPQ5018. Tested with a USB Mass storage device. Depends on: Link: https://lore.kernel.org/linux-arm-msm/20230831030503.17100-1-quic_nsekar@xxxxxxxxxxx/ [V4]: Add C99 initializers. Write 0 register values. [V3]: Incorporated review comments with respect to naming USB related device tree nodes, dropped the 0 dealy inits and added the static const type for m31_ipq5018_regs. Sorted nodes in board specific device tree file. [V2]: Incorporated review comments regarding splitting the series as per subsytem, device tree naming conventions and ordereing of the nodes. Nitheesh Sekar (4): dt-bindings: phy: qcom,m31: Add IPQ5018 compatible phy: qcom-m31: Add compatible, phy init sequence for IPQ5018 arm64: dts: qcom: ipq5018: Add USB related nodes arm64: dts: qcom: ipq5018: Enable USB .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml | 4 +- .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 12 +++++ arch/arm64/boot/dts/qcom/ipq5018.dtsi | 54 +++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-m31.c | 51 ++++++++++++++++++ 4 files changed, 120 insertions(+), 1 deletion(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
