On 8/31/2023 2:58 PM, Varadarajan Narayanan wrote:
IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
This must not be scaled based on the requirement of
dependent clocks. Hence remove the CLK_SET_RATE_PARENT
flag.
Reviewed-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
Fixes: 3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
drivers/clk/qcom/gcc-ipq5332.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index b02026f..b836159 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -71,7 +71,6 @@ static struct clk_fixed_factor gpll0_div2 = {
&gpll0_main.clkr.hw },
.num_parents = 1,
.ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT,
},
};
@@ -85,7 +84,6 @@ static struct clk_alpha_pll_postdiv gpll0 = {
&gpll0_main.clkr.hw },
.num_parents = 1,
.ops = &clk_alpha_pll_postdiv_ro_ops,
- .flags = CLK_SET_RATE_PARENT,
},
};
