[PATCH v2] clk: qcom: ipq5332: Drop set rate parent from gpll0 dependent clocks

[Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>]

IPQ5332's GPLL0's nominal/turbo frequency is 800MHz.
This must not be scaled based on the requirement of
dependent clocks. Hence remove the CLK_SET_RATE_PARENT
flag.

Fixes: 3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
 drivers/clk/qcom/gcc-ipq5332.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index b02026f..b836159 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -71,7 +71,6 @@ static struct clk_fixed_factor gpll0_div2 = {
 				&gpll0_main.clkr.hw },
 		.num_parents = 1,
 		.ops = &clk_fixed_factor_ops,
-		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -85,7 +84,6 @@ static struct clk_alpha_pll_postdiv gpll0 = {
 				&gpll0_main.clkr.hw },
 		.num_parents = 1,
 		.ops = &clk_alpha_pll_postdiv_ro_ops,
-		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
-- 
2.7.4