Re: [PATCH v5 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 29, 2023 at 02:06:38PM -0700, Wesley Cheng wrote:
> Add a new definition for specifying how many XHCI secondary interrupters
> can be allocated.  XHCI in general can potentially support up to 1024
> interrupters, which some uses may want to limit depending on how many
> users utilize the interrupters.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> index a696f23730d3..596762ef9b9f 100644
> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> @@ -376,6 +376,19 @@ properties:
>      items:
>        enum: [1, 4, 8, 16, 32, 64, 128, 256]
>  
> +  snps,num-hc-interrupters:

Why do you still have this when you defined a common property?

If you want to limit it here, just do: 

num-hc-interrupters:
  maximum: 8


> +    description:
> +      Defines the maximum number of XHCI host controller interrupters that can
> +      be supported.  The XHCI host controller has support to allocate multiple
> +      event rings, which can be assigned to different clients/users.  The DWC3
> +      controller has a maximum of 8 interrupters.  If this is not defined then
> +      the value will be defaulted to 1.  This parameter is used only when
> +      operating in host mode.
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    minimum: 1
> +    maximum: 8
> +    default: 1
> +
>    port:
>      $ref: /schemas/graph.yaml#/properties/port
>      description:



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux