[PATCH v5 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a new definition for specifying how many XHCI secondary interrupters
can be allocated.  XHCI in general can potentially support up to 1024
interrupters, which some uses may want to limit depending on how many
users utilize the interrupters.

Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
 .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index a696f23730d3..596762ef9b9f 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -376,6 +376,19 @@ properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  snps,num-hc-interrupters:
+    description:
+      Defines the maximum number of XHCI host controller interrupters that can
+      be supported.  The XHCI host controller has support to allocate multiple
+      event rings, which can be assigned to different clients/users.  The DWC3
+      controller has a maximum of 8 interrupters.  If this is not defined then
+      the value will be defaulted to 1.  This parameter is used only when
+      operating in host mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 8
+    default: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux