[PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add ipq5332 USB3 SS UNIPHY support.

Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
---
 .../devicetree/bindings/phy/qcom,uniphy.yaml  | 117 +++++++++++++++++-
 1 file changed, 114 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml b/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml
index cbe2cc820009..17ba661b3d9b 100644
--- a/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,uniphy.yaml
@@ -19,21 +19,53 @@ properties:
     enum:
       - qcom,usb-ss-ipq4019-phy
       - qcom,usb-hs-ipq4019-phy
+      - qcom,ipq5332-usb-ssphy
 
   reg:
     maxItems: 1
 
+  reg-names:
+    items:
+      - const: phy_base
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    maxItems: 3
+
+  "#clock-cells":
+    const: 0
+
   resets:
+    minItems: 1
     maxItems: 2
 
   reset-names:
-    items:
-      - const: por_rst
-      - const: srif_rst
+    minItems: 1
+    maxItems: 2
+
+  clock-output-names:
+    maxItems: 1
 
   "#phy-cells":
     const: 0
 
+  qcom,phy-mux-sel:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      PHY Mux Selection for used to select which interface is going to use the
+      combo PHY.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the PHY Mux selection register
+          - description: value to write on the PHY Mux selection register
+
+  vdd-supply:
+    description:
+      Phandle to 5V regulator supply to PHY digital circuit.
+
 required:
   - compatible
   - reg
@@ -41,6 +73,68 @@ required:
   - reset-names
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5332-usb-ssphy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pipe
+            - const: phy_cfg_ahb
+            - const: phy_ahb
+
+        "#clock-cells":
+          const: 0
+
+        clock-output-names:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: por_rst
+
+        vdda-supply:
+          description:
+            Phandle to 5V regulator supply to PHY digital circuit.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,usb-ss-ipq4019-phy
+    then:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: por_rst
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,usb-hs-ipq4019-phy
+    then:
+      properties:
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: por_rst
+            - const: srif_rst
+
 additionalProperties: false
 
 examples:
@@ -55,3 +149,20 @@ examples:
                <&gcc USB2_HSPHY_S_ARES>;
       reset-names = "por_rst", "srif_rst";
     };
+
+  - |
+    #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+
+    ssuniphy@4b0000 {
+      #phy-cells = <0>;
+      #clock-cells = <0>;
+      compatible = "qcom,ipq5332-usb-ssphy";
+      reg = <0x4b0000 0x800>;
+      clocks = <&gcc GCC_USB0_PIPE_CLK>,
+               <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+               <&gcc GCC_PCIE3X1_PHY_AHB_CLK>;
+      clock-names = "pipe", "phy_cfg_ahb", "phy_ahb";
+
+      resets = <&gcc GCC_USB0_PHY_BCR>;
+      reset-names = "por_rst";
+    };
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux