Re: [PATCH 2/3] dt-bindings: clock: add qca8386/qca8084 clock and reset definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/08/2023 07:19, Jie Luo wrote:
>>> +properties:
>>> +  compatible:
>>> +    const: qcom,nsscc-qca8k
>>
>> SoC name is before IP block names. See:
>> Documentation/devicetree/bindings/arm/qcom-soc.yaml
>>
>> qca8k is not SoC specific. I don't know what you are documenting here,
>> but if this is a SoC, then follow SoC rules.
>>
>> If this is not SoC, it confuses me a bit to use GCC binding.
>>
>> Anyway, this was not tested, as pointed out by bot... Please test the
>> code before sending.
>>
>> Best regards,
>> Krzysztof
>>
> 
> Hi Krzysztof,
> 
> Thanks for the review comments.
> qca8383/qca8084 is a network chip that support switch mode and PHY mode,
> the hardware register is accessed by MDIO bus, which is not a SOC.
> 
> But it has the self-contained clock controller system, the clock 
> framework of qca8386/qca8084 is same as the GCC of ipq platform such as 
> ipq9574.

OK

> 
> would you help advise whether we can document it with the compatible
> "qcom,qca8k-nsscc"?

For example:
qcom,qca8084-nsscc

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux