Re: [PATCH 3/3] clk: qcom: add clock controller driver for qca8386/qca8084

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/1/23 01:53, Luo Jie wrote:
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 263e55d75e3f..a17e8fa5a7e1 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -195,6 +195,14 @@ config IPQ_GCC_9574
>  	  i2c, USB, SD/eMMC, etc. Select this for the root clock
>  	  of ipq9574.
>  
> +config IPQ_NSSCC_QCA8K
> +        tristate "QCA8K(QCA8386 or QCA8084) NSS Clock Controller"
> +        help

The 2 lines above should be indented with one tab (only; no spaces).

> +          Support for NSS(Network SubSystem) clock controller on

The line above should be indented with one tab + 2 spaces (like the following
3 lines).

> +	  qca8386/qca8084 chip.
> +	  Say Y if you want to use network function of switch or PHY
> +	  function. Select this for the root clock of qca8xxx.

-- 
~Randy



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux