On Tue, 01 Aug 2023 16:53:51 +0800, Luo Jie wrote: > QCA8386/QCA8084 includes the clock & reset controller that is > accessed by MDIO bus. Two work modes are supported, qca8386 works > as switch mode, qca8084 works as PHY mode. > > Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx> > --- > .../bindings/clock/qcom,nsscc-qca8k.yaml | 59 ++++++++++ > include/dt-bindings/clock/qcom,nsscc-qca8k.h | 102 ++++++++++++++++++ > include/dt-bindings/reset/qcom,nsscc-qca8k.h | 76 +++++++++++++ > 3 files changed, 237 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.yaml > create mode 100644 include/dt-bindings/clock/qcom,nsscc-qca8k.h > create mode 100644 include/dt-bindings/reset/qcom,nsscc-qca8k.h > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dts:22.11-22: Warning (reg_format): /example-0/clock-controller@24:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dtb: clock-controller@24: '#power-domain-cells' is a required property from schema $id: http://devicetree.org/schemas/clock/qcom,nsscc-qca8k.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.example.dtb: clock-controller@24: Unevaluated properties are not allowed ('#clock-cells', '#reset-cells' were unexpected) from schema $id: http://devicetree.org/schemas/clock/qcom,nsscc-qca8k.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230801085352.22873-3-quic_luoj@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
