Update the pm8350c lpg_data struct so that pm8350c devices are treated as
PWM devices that support two-nvmem PPG scheme.
Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
---
drivers/leds/rgb/leds-qcom-lpg.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index f3f83925ab41..bd54b023d509 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -1826,11 +1826,15 @@ static const struct lpg_data pm8150l_lpg_data = {
static const struct lpg_data pm8350c_pwm_data = {
.triled_base = 0xef00,
+ .lut_size = 122,
+ .lut_sdam_base = 0x45,
+ .nvmem_count = 2,
+
.num_channels = 4,
.channels = (const struct lpg_channel_data[]) {
- { .base = 0xe800, .triled_mask = BIT(7) },
- { .base = 0xe900, .triled_mask = BIT(6) },
- { .base = 0xea00, .triled_mask = BIT(5) },
+ { .base = 0xe800, .triled_mask = BIT(7), .sdam_offset = 0x48 },
+ { .base = 0xe900, .triled_mask = BIT(6), .sdam_offset = 0x56 },
+ { .base = 0xea00, .triled_mask = BIT(5), .sdam_offset = 0x64 },
{ .base = 0xeb00 },
},
};
--
2.41.0
