In certain PMICs, LUT pattern and LPG configuration can be stored in SDAM
modules instead of LUT peripheral. This feature is called PPG.
This change series adds support for PPG. Thanks!
Changes since v1:
- Patch 1/7
- Fix dt_binding_check errors
- Update binding description
- Path 2/7
- Fix dt_binding_check errors
- Update per variant constraints
- Update nvmem description
- Patch 3/7
- Update get_pbs_client_device()
- Drop use of printk
- Remove unused function
Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> # sdm632-fairphone-fp3 (pmi632)
Anjelique Melendez (7):
dt-bindings: soc: qcom: Add qcom-pbs bindings
dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
soc: qcom: add QCOM PBS driver
leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
.../bindings/leds/leds-qcom-lpg.yaml | 92 +++-
.../bindings/soc/qcom/qcom-pbs.yaml | 40 ++
drivers/leds/rgb/leds-qcom-lpg.c | 395 ++++++++++++++++--
drivers/soc/qcom/Kconfig | 9 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom-pbs.c | 302 +++++++++++++
include/linux/soc/qcom/qcom-pbs.h | 30 ++
7 files changed, 836 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
create mode 100644 drivers/soc/qcom/qcom-pbs.c
create mode 100644 include/linux/soc/qcom/qcom-pbs.h
--
2.41.0
