On 20/07/2023 09:48, Hariharan K wrote: > Add the initial device tree support for the Reference Design > Platform(RDP) 415 based on IPQ5018 family of SoC. This patch > carries the support for Console UART and eMMC. > > Signed-off-by: Hariharan K <quic_harihk@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts | 49 +++++++++++++++++++++ > 2 files changed, 50 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 6334e552b7c1..53df7f24488a 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb > dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb > dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb > dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp415.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts > new file mode 100644 > index 000000000000..5c4b43f76a48 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts > @@ -0,0 +1,49 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * IPQ5018 MP03.3-C2 board device tree source > + * Copyright (c) 2023, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5018-rdp-common.dtsi" I don't understand this. You just added in in the same moment in different patchset, so why creating this fake dependency? It makes review difficult, applying even more. Please organize your patches in some logical work. Best regards, Krzysztof
