[PATCH 0/2] Add initial support for RDP415 of IPQ5018 family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the initial device tree support for the Reference Design
Platform(RDP) 415 based on IPQ5018 family of SoC. This patch
carries the support for Console UART and eMMC.

This series is based on the below series,
https://lore.kernel.org/lkml/20230720072938.315
46-1-quic_harihk@xxxxxxxxxxx/

Hariharan K (2):
  dt-bindings: arm: qcom: Document MP03.3-C2 board based on IPQ5018
    family
  arm64: dts: qcom: ipq5018: add support for the RDP415 variant

 .../devicetree/bindings/arm/qcom.yaml         |  2 +
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts   | 49 +++++++++++++++++++
 3 files changed, 52 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp415.dts

-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux