Re: [PATCH 2/5] arm64: dts: qcom: sm8250: Add DisplayPort device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9.07.2023 06:19, Dmitry Baryshkov wrote:
> Declare the displayport controller present on the Qualcomm SM8250 SoC.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
[...]

> +				dp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
19.2 MHz, VDD_MIN

> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
270 MHz, LOW_SVS
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
540 MHz, SVS_L1 (ok)
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
810 MHz, NOM (also ok)

(but then - there's qcom,max-pclk-frequency-khz = <675000>;)

also, what's up with the PIXEL1 clocks etc.?
they are capped at the aforementioned 675 Mhz but I have no idea
what they're for

Konrad
> +					};
> +				};
> +			};
> +
>  			mdss_dsi0: dsi@ae94000 {
>  				compatible = "qcom,sm8250-dsi-ctrl",
>  					     "qcom,mdss-dsi-ctrl";



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux