Re: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/10/2023 5:44 PM, Konrad Dybcio wrote:
On 10.07.2023 13:23, Dmitry Baryshkov wrote:
On 10/07/2023 13:37, Praveenkumar I wrote:
This patch adds thermal zone nodes for sensors present in
IPQ5332.

Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
---
   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
   1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index a1e3527178c0..8b276aeca53e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -527,4 +527,76 @@ timer {
                    <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
                    <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
       };
+
+    thermal-zones {
+        rfa-0-thermal{
thermal {
In all other DTS, name is 'thermal-zones". Hence followed the same.

+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 11>;
+
+            trips {
Indentation seems off, tab size for kernel code is 8 spaces.
Sure, will check the indent and update in next patch.

Konrad
+                rfa-0-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+
+        rfa-1-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 12>;
+
+            trips {
+                rfa-1-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+
+        misc-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 13>;
+
+            trips {
+                misc-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+
+        cpu-top-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 14>;
+
+            trips {
+                cpu-top-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
Could you please add a passive cooling devices for the CPU?

+        };
+
+        top-glue-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+            thermal-sensors = <&tsens 15>;
+
+            trips {
+                top-glue-critical {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+            };
+        };
+    };
   };
--
Thanks,
Praveenkumar



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux