On 10.07.2023 13:23, Dmitry Baryshkov wrote:
> On 10/07/2023 13:37, Praveenkumar I wrote:
>> This patch adds thermal zone nodes for sensors present in
>> IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>> 1 file changed, 72 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> index a1e3527178c0..8b276aeca53e 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -527,4 +527,76 @@ timer {
>> <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> };
>> +
>> + thermal-zones {
>> + rfa-0-thermal{
thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 11>;
>> +
>> + trips {
Indentation seems off, tab size for kernel code is 8 spaces.
Konrad
>> + rfa-0-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + rfa-1-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 12>;
>> +
>> + trips {
>> + rfa-1-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + misc-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 13>;
>> +
>> + trips {
>> + misc-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + cpu-top-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 14>;
>> +
>> + trips {
>> + cpu-top-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>
> Could you please add a passive cooling devices for the CPU?
>
>> + };
>> +
>> + top-glue-thermal {
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&tsens 15>;
>> +
>> + trips {
>> + top-glue-critical {
>> + temperature = <125000>;
>> + hysteresis = <1000>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> + };
>> };
>
