Re: [PATCH v3 20/28] ARM: dts: qcom: apq8064: add Krait clock controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2.07.2023 19:42, Dmitry Baryshkov wrote:
> Add device node for the clock controller for the CPU cores and L2
> clocks. It will be further used by the L2 and by the CPUfreq nodes.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 26 ++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
> index ab4b8f8270bb..c212215800d0 100644
> --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
> @@ -213,6 +213,32 @@ sleep_clk: sleep_clk {
>  		};
>  	};
>  
> +	kraitcc: clock-controller {
> +		compatible = "qcom,krait-cc-v1";
> +		clocks = <&gcc PLL9>, /* hfpll0 */
> +			 <&gcc PLL10>, /* hfpll1 */
> +			 <&gcc PLL16>, /* hfpll2 */
> +			 <&gcc PLL17>, /* hfpll3 */
> +			 <&gcc PLL12>, /* hfpll_l2 */
I'm not sure how useful these comments are, given clock-names are
just like 7 lines below.

Konrad
> +			 <&acc0>,
> +			 <&acc1>,
> +			 <&acc2>,
> +			 <&acc3>,
> +			 <&l2cc>;
> +		clock-names = "hfpll0",
> +			      "hfpll1",
> +			      "hfpll2",
> +			      "hfpll3",
> +			      "hfpll_l2",
> +			      "acpu0_aux",
> +			      "acpu1_aux",
> +			      "acpu2_aux",
> +			      "acpu3_aux",
> +			      "acpu_l2_aux";
> +		#clock-cells = <1>;
> +		#interconnect-cells = <1>;
> +	};
> +
>  	sfpb_mutex: hwmutex {
>  		compatible = "qcom,sfpb-mutex";
>  		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux