Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/06/2023 11:47, Lin, Meng-Bo wrote:
Hi Bryan,

On Friday, June 23rd, 2023 at 10:27 AM, Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> wrote:

+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung Galaxy A7 (2015)";
+ compatible = "samsung,a7", "qcom,msm8939";
+ chassis-type = "handset";


Will the downstream bootloader accept this dts without

// This is used by the bootloader to find the correct DTB
qcom,msm-id = <239 0>;

qcom,board-id = <0xEF08FF1 1>;


?

https://github.com/msm8916-mainline/lk2nd/blob/master/dts/msm8916/msm8939-samsung-r01.dts#L10


Similar to A3 and A5, and the other msm8916 devices, with lk2nd,
"qcom,msm-id" or "qcom,board-id" are not required in mainline to boot
this dts.
If I understand correctly, lk2nd will attempt to boot an image with any
qcdt appended.

https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts

I understand.

IMO the upstream DTS should work without depending on lk2nd.

I'd add the board and msm id to the DTS for that reason.

If not then I'd put a comment into the DTS explaining the dependency.

For preference the upstream dts should *just work* as much as possible without requiring churning of bootloader.

---
bod




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux