Re: [PATCH v2 2/2] arm64: dts: qcom: msm8939-samsung-a7: Add initial dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/06/2023 11:02, Lin, Meng-Bo wrote:
This dts adds support for Samsung Galaxy A7 smartphone released in 2015.

Add a device tree for A7 with initial support for:

- GPIO keys
- Hall Sensor
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5502 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- Touch key
- Accelerometer/Magnetometer
- Fuelgauge
- NFC
- Vibrator
- Touchscreen

Signed-off-by: Lin, Meng-Bo <linmengbo0689@xxxxxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/Makefile             |   1 +
  .../boot/dts/qcom/msm8939-samsung-a7.dts      | 495 ++++++++++++++++++
  2 files changed, 496 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 337abc4ceb17..23fd31d4bf5a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
new file mode 100644
index 000000000000..66e56ac59998
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A7 (2015)";
+	compatible = "samsung,a7", "qcom,msm8939";
+	chassis-type = "handset";

Will the downstream bootloader accept this dts without

        // This is used by the bootloader to find the correct DTB
        qcom,msm-id = <239 0>;
        qcom,board-id = <0xEF08FF1 1>;

?

https://github.com/msm8916-mainline/lk2nd/blob/master/dts/msm8916/msm8939-samsung-r01.dts#L10

---
bod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux