Re: [PATCH v7 8/9] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 3.05.2023 05:55, Krishna Kurapati PSSNV wrote:
> 
> 
> On 5/2/2023 4:36 PM, Konrad Dybcio wrote:
>>
>>
>> On 1.05.2023 16:34, Krishna Kurapati wrote:
>>> Enable tertiary controller for SA8295P (based on SC8280XP).
>>> Add pinctrl support for usb ports to provide VBUS to connected peripherals.
>>>
>>> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
>>> ---
>>>   arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 ++++++++++++++++++++++++
>>>   1 file changed, 47 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>>> index fd253942e5e5..7e6061c43835 100644
>>> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>>> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>>> @@ -584,6 +584,19 @@ &usb_1_qmpphy {
>>>       status = "okay";
>>>   };
>>>   +&usb_2 {
>>> +    pinctrl-names = "default";
>>> +    pinctrl-0 = <&usb2_en_state>,
>>> +            <&usb3_en_state>,
>>> +            <&usb4_en_state>,
>>> +            <&usb5_en_state>;
>> This is misaligned. Also, please do property-n before property-names.
>>
>>> +    status = "okay";
>>> +};
>>> +
>>> +&usb_2_dwc3 {
>>> +    dr_mode = "host";
>>> +};
>>> +
>>>   &usb_2_hsphy0 {
>>>       vdda-pll-supply = <&vreg_l5a>;
>>>       vdda18-supply = <&vreg_l7g>;
>>> @@ -729,3 +742,37 @@ wake-n-pins {
>>>           };
>>>       };
>>>   };
>>> +
>>> +&pmm8540c_gpios {
>>> +    usb2_en_state: usb2-en-state {
>>> +        pins = "gpio9";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>> No drive-strength values?
>>
>> Konrad
> 
> Hi Konrad,
> 
>  TBH, I didn't add the drive strength values as things worked out of the box with the current changes (may be the default value of drive strength is sufficient for us).
> 
> Let me know if it is mandatory, I will add it up in the next version.
It's not, but it helps eliminate one more potential inconsistency

Konrad
> 
> Regards,
> Krishna,
> 
>>> +    };
>>> +};
>>> +
>>> +&pmm8540e_gpios {
>>> +    usb3_en_state: usb3-en-state {
>>> +        pins = "gpio5";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>>> +    };
>>> +};
>>> +
>>> +&pmm8540g_gpios {
>>> +    usb4_en_state: usb4-en-state {
>>> +        pins = "gpio5";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>>> +    };
>>> +
>>> +    usb5_en_state: usb5-en-state {
>>> +        pins = "gpio9";
>>> +        function = "normal";
>>> +        output-high;
>>> +        power-source = <0>;
>>> +    };
>>> +};



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux