On 1.05.2023 16:34, Krishna Kurapati wrote:
> Enable tertiary controller for SA8295P (based on SC8280XP).
> Add pinctrl support for usb ports to provide VBUS to connected peripherals.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 ++++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index fd253942e5e5..7e6061c43835 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -584,6 +584,19 @@ &usb_1_qmpphy {
> status = "okay";
> };
>
> +&usb_2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb2_en_state>,
> + <&usb3_en_state>,
> + <&usb4_en_state>,
> + <&usb5_en_state>;
This is misaligned. Also, please do property-n before property-names.
> + status = "okay";
> +};
> +
> +&usb_2_dwc3 {
> + dr_mode = "host";
> +};
> +
> &usb_2_hsphy0 {
> vdda-pll-supply = <&vreg_l5a>;
> vdda18-supply = <&vreg_l7g>;
> @@ -729,3 +742,37 @@ wake-n-pins {
> };
> };
> };
> +
> +&pmm8540c_gpios {
> + usb2_en_state: usb2-en-state {
> + pins = "gpio9";
> + function = "normal";
> + output-high;
> + power-source = <0>;
No drive-strength values?
Konrad
> + };
> +};
> +
> +&pmm8540e_gpios {
> + usb3_en_state: usb3-en-state {
> + pins = "gpio5";
> + function = "normal";
> + output-high;
> + power-source = <0>;
> + };
> +};
> +
> +&pmm8540g_gpios {
> + usb4_en_state: usb4-en-state {
> + pins = "gpio5";
> + function = "normal";
> + output-high;
> + power-source = <0>;
> + };
> +
> + usb5_en_state: usb5-en-state {
> + pins = "gpio9";
> + function = "normal";
> + output-high;
> + power-source = <0>;
> + };
> +};
