Re: [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 27.04.2023 15:27, Neil Armstrong wrote:
> On 27/04/2023 01:33, Konrad Dybcio wrote:
>>
>> On 4/25/23 04:40, Bjorn Andersson wrote:
>>> With support for the QMP combo phy to react to USB Type-C switch events,
>>> introduce it as the next hop for the SuperSpeed lanes of the two USB
>>> Type-C connectors, and connect the output of the DisplayPort controller
>>> to the QMP combo phy.
>>>
>>> This allows the TCPM to perform orientation switching of both USB and
>>> DisplayPort signals.
>>>
>>> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
>>> ---
>>>   arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 28 ++++++++++++++++---
>>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi    | 34 +++++++++++++++++++++++
>>>   2 files changed, 58 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>>> index 547277924ea3..33c973661fa5 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>>> @@ -64,7 +64,7 @@ port@1 {
>>>                       reg = <1>;
>>>                       pmic_glink_con0_ss: endpoint {
>>> -                        remote-endpoint = <&mdss0_dp0_out>;
>>> +                        remote-endpoint = <&usb_0_qmpphy_out>;
>>>                       };
>>>                   };
>>> @@ -99,7 +99,7 @@ port@1 {
>>>                       reg = <1>;
>>>                       pmic_glink_con1_ss: endpoint {
>>> -                        remote-endpoint = <&mdss0_dp1_out>;
>>> +                        remote-endpoint = <&usb_1_qmpphy_out>;
>>>                       };
>>>                   };
>>> @@ -412,7 +412,7 @@ &mdss0_dp0 {
>>>   &mdss0_dp0_out {
>>>       data-lanes = <0 1>;
>>> -    remote-endpoint = <&pmic_glink_con0_ss>;
>>> +    remote-endpoint = <&usb_0_qmpphy_dp_in>;
>>>   };
>>>   &mdss0_dp1 {
>>> @@ -421,7 +421,7 @@ &mdss0_dp1 {
>>>   &mdss0_dp1_out {
>>>       data-lanes = <0 1>;
>>> -    remote-endpoint = <&pmic_glink_con1_ss>;
>>> +    remote-endpoint = <&usb_1_qmpphy_dp_in>;
>>>   };
>>>   &mdss0_dp3 {
>>> @@ -670,9 +670,19 @@ &usb_0_qmpphy {
>>>       vdda-phy-supply = <&vreg_l9d>;
>>>       vdda-pll-supply = <&vreg_l4d>;
>>> +    orientation-switch;
>>
>> I believe this belongs in the SoC DTSI, as it's supported by
>> the PHY block itself
>>
>>
>> The rest seems to lgtm..
>>
>>
>> On a note, why did we end up placing pmic_glink in device
>> DTs? It's already assumed that we're using the full Qualcomm
>> stack as we use PAS for remoteprocs so I *think* we can always
>> assume pmic_glink would be there!
> 
> As we did on other board, I think because having pmic_glink depends
> on the board firmware capabilities ? Boards without USB-C won't need/have
> pmic_link right ?
PMIC_GLINK takes care of USB-C, but also enables battmgr and friends

Konrad
> 
> Neil
> 
>>
>> Konrad
>>
>>> +
>>>       status = "okay";
>>>   };
>>> +&usb_0_qmpphy_dp_in {
>>> +    remote-endpoint = <&mdss0_dp0_out>;
>>> +};
>>> +
>>> +&usb_0_qmpphy_out {
>>> +    remote-endpoint = <&pmic_glink_con0_ss>;
>>> +};
>>> +
>>>   &usb_0_role_switch {
>>>       remote-endpoint = <&pmic_glink_con0_hs>;
>>>   };
>>> @@ -697,9 +707,19 @@ &usb_1_qmpphy {
>>>       vdda-phy-supply = <&vreg_l4b>;
>>>       vdda-pll-supply = <&vreg_l3b>;
>>> +    orientation-switch;
>>> +
>>>       status = "okay";
>>>   };
>>> +&usb_1_qmpphy_dp_in {
>>> +    remote-endpoint = <&mdss0_dp1_out>;
>>> +};
>>> +
>>> +&usb_1_qmpphy_out {
>>> +    remote-endpoint = <&pmic_glink_con1_ss>;
>>> +};
>>> +
>>>   &usb_1_role_switch {
>>>       remote-endpoint = <&pmic_glink_con1_hs>;
>>>   };
>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> index 0e691bb0120c..1eb3a295e8fa 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>> @@ -3006,6 +3006,23 @@ usb_0_qmpphy: phy@88eb000 {
>>>               #phy-cells = <1>;
>>>               status = "disabled";
>>> +
>>> +            ports {
>>> +                #address-cells = <1>;
>>> +                #size-cells = <0>;
>>> +
>>> +                port@0 {
>>> +                    reg = <0>;
>>> +
>>> +                    usb_0_qmpphy_out: endpoint {};
>>> +                };
>>> +
>>> +                port@1 {
>>> +                    reg = <1>;
>>> +
>>> +                    usb_0_qmpphy_dp_in: endpoint {};
>>> +                };
>>> +            };
>>>           };
>>>           usb_1_hsphy: phy@8902000 {
>>> @@ -3042,6 +3059,23 @@ usb_1_qmpphy: phy@8903000 {
>>>               #phy-cells = <1>;
>>>               status = "disabled";
>>> +
>>> +            ports {
>>> +                #address-cells = <1>;
>>> +                #size-cells = <0>;
>>> +
>>> +                port@0 {
>>> +                    reg = <0>;
>>> +
>>> +                    usb_1_qmpphy_out: endpoint {};
>>> +                };
>>> +
>>> +                port@1 {
>>> +                    reg = <1>;
>>> +
>>> +                    usb_1_qmpphy_dp_in: endpoint {};
>>> +                };
>>> +            };
>>>           };
>>>           mdss1_dp0_phy: phy@8909a00 {
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux