Re: [PATCH 4/4] drm/msm/dpu: Enable compression for command mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/3/2023 4:00 PM, Marijn Suijten wrote:
Hi Jessica,

On 2023-05-03 12:04:59, Jessica Zhang wrote:


On 5/3/2023 12:28 AM, Marijn Suijten wrote:
On 2023-05-02 18:19:15, Jessica Zhang wrote:
Add a dpu_hw_intf op to enable data compression.

Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 4 ++++
   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c          | 7 +++++++
   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h          | 2 ++
   3 files changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 74470d068622..4321a1aba17f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c

Can we have INTF DCE on video-mode encoders as well?

Hi Marijn,

Currently, there's no way to validate DSC for video mode as I've only
made changes to support DSI for command mode. We are planning to post
changes to support DSC over DP, which will include changes for video mode.

Okay, but then mention so in the patch description (which is rather
short in this revision).

Acked.


<snip>

   #define INTF_CFG2_DATABUS_WIDEN	BIT(0)
   #define INTF_CFG2_DATA_HCTL_EN	BIT(4)

These should probably be reindented to match the below... And the rest
of the defines use spaces instead of tabs.

Fair point, though I think fixing the whitespace for these 2 macros
specifically might be better in a more relevant series.

Yes, I have many patches to start cleaning these up, as well as all the
broken kerneldoc comments, but it's an uphill battle.  Not sure if I'll
get to it any time soon if at all.

With that being said, I'll change the spacing of the DATA_COMPRESS bit
to spaces instead of tabs.

Thanks, that seems to be the most common format.

+#define INTF_CFG2_DCE_DATA_COMPRESS	BIT(12)
#define INTF_MISR_CTRL 0x180
   #define INTF_MISR_SIGNATURE		0x184

This does not seem to apply on top of:
https://lore.kernel.org/linux-arm-msm/20230411-dpu-intf-te-v4-10-27ce1a5ab5c6@xxxxxxxxxxxxxx/

Seems like I'm missing some patches from that series on my working
branch. Will rebase on top of the full series for the v2.

Thanks, but do discuss with Abhinav/Dmitry which series will land first.

+static inline void dpu_hw_intf_enable_compression(struct dpu_hw_intf *ctx)

Why inline?  This is used as a pointer callback.

Acked, will remove the inline.


+{
+	DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, INTF_CFG2_DCE_DATA_COMPRESS);

dpu_hw_intf_setup_timing_engine() also programs INTF_CONFIG2.  Is it
double-buffered, or is that config **always** unused when DSI CMD mode
is used in conjunction with DSC/DCE?  Otherwise this should perhaps OR
the bitflag into the register, or write the whole thing at once in
dpu_hw_intf_setup_timing_engine()?

For command mode, INTF_CONFIG2 is unused aside from setting
DATA_COMPRESS for DSC.

Since setup_timing_engine() is only used for video mode, the
corresponding changes will be made in the DSC v1.2 for DP changes.

Ack, that makes sense.  However, is this a guarantee that nothing else
will write INTF_CONFIG2 in the future, or will we solve that problem
when it happens?  I'm afraid more config-bits get added to this register
in the future and might possibly race/overwrite each other.

That's a fair point. There's no guarantee that nothing else will set INTF_CONFIG2 for command mode in the future. I think it would be better to add a register read now instead of having to fix that issue in a future change.

Thanks,

Jessica Zhang


- Marijn

<snip>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux