Re: [PATCH 4/4] ARM: dts: qcom: msm8974-hammerhead: Add vibrator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 27/04/2023 21:34, Luca Weiss wrote:
The Nexus 5 has a vibrator connected to the clock output of GP1_CLK
which we can use with the clk-pwm driver, then we can use that pwm with
pwm-vibrator to get haptics functionality.

This patch is based on Brian Masney's previous patch with clk-vibrator.

Signed-off-by: Luca Weiss <luca@xxxxxxxxx>

Reviewed-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
  .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts     | 35 ++++++++++++++++++++++
  1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index ab35f2d644c0..fea8a6be9021 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -41,6 +41,25 @@ key-volume-down {
  		};
  	};
+ clk_pwm: pwm {
+		compatible = "clk-pwm";
+		clocks = <&mmcc CAMSS_GP1_CLK>;
+
+		pinctrl-0 = <&vibrator_pin>;
+		pinctrl-names = "default";
+
+		#pwm-cells = <2>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&pm8941_l19>;
+		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+	};
+
  	vreg_wlan: wlan-regulator {
  		compatible = "regulator-fixed";
@@ -637,6 +656,22 @@ shutdown-pins {
  			function = "gpio";
  		};
  	};
+
+	vibrator_pin: vibrator-state {
+		core-pins {
+			pins = "gpio27";
+			function = "gp1_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		enable-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
  };
&usb {




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux