[PATCH 0/4] Add haptics support to Nexus 5 using pwm-vibra driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A while ago Brian Masney sent some patches for a clk-vibrator which was
then succeeded by the idea of a clk-pwm driver that "converts" a clock
into a PWM and to use the existing pwm-vibra driver.

Since clk-pwm has landed last year we can finally add haptics support
upstream.

We just need to add support for an enable GPIO to the pwm-vibra driver
since that also needs to be high for the haptics to work on this device.

Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Luca Weiss (4):
      dt-bindings: input: pwm-vibrator: Add enable-gpio
      Input: pwm-vibra - add newline to dev_err prints
      Input: pwm-vibra - add support for enable GPIO
      ARM: dts: qcom: msm8974-hammerhead: Add vibrator

 .../devicetree/bindings/input/pwm-vibrator.yaml    |  2 ++
 .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts     | 35 +++++++++++++++++++++
 drivers/input/misc/pwm-vibra.c                     | 36 ++++++++++++++++------
 3 files changed, 63 insertions(+), 10 deletions(-)
---
base-commit: dec7f67a13c3270f9a38eba227a4fc15993f01b3
change-id: 20230427-hammerhead-vibra-06bd1bf771a3

Best regards,
-- 
Luca Weiss <luca@xxxxxxxxx>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux