Switch on USB orientation-switching for usb_1_qmp via TCPM. Detecting the
orientation switch is required to get the PHY to reset and bring-up the PHY
with the CC lines set to the appropriate lane.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index b5cc45358a474..8935a8e327904 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1295,6 +1295,14 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p92>;
+ orientation-switch;
+ ports {
+ port@1 {
+ qmpphy_typec_mux_in: endpoint {
+ remote-endpoint = <&pm8150b_typec_mux_out>;
+ };
+ };
+ };
};
&usb_2 {
@@ -1375,6 +1383,12 @@ pm8150b_role_switch_out: endpoint {
remote-endpoint = <&dwc3_role_switch_in>;
};
};
+ port@1 {
+ reg = <1>;
+ pm8150b_typec_mux_out: endpoint {
+ remote-endpoint = <&qmpphy_typec_mux_in>;
+ };
+ };
};
};
};
--
2.39.2
