Switch on usb-role-switching for usb_1 via TCPM. We need to declare
usb-role-switch in &usb_1 and associate with the remote-endpoint in TCPM
which provides the necessary signal.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 1e0b6fd59abc9..b5cc45358a474 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1273,7 +1273,13 @@ &usb_1 {
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ usb-role-switch;
+ port {
+ dwc3_role_switch_in: endpoint {
+ remote-endpoint = <&pm8150b_role_switch_out>;
+ };
+ };
};
&usb_1_hsphy {
@@ -1359,5 +1365,16 @@ connector {
PDO_FIXED_DUAL_ROLE |
PDO_FIXED_USB_COMM |
PDO_FIXED_DATA_SWAP)>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm8150b_role_switch_out: endpoint {
+ remote-endpoint = <&dwc3_role_switch_in>;
+ };
+ };
+ };
};
};
--
2.39.2
