On 8.04.2023 15:48, Krzysztof Kozlowski wrote:
> The GCC clock controller needs CX power domain, at least according to
> DTS:
>
> sc7180-trogdor-pompom-r3.dtb: clock-controller@100000: Unevaluated properties are not allowed ('power-domains' was unexpected)
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
+CC Rajendra (author of 5d6fc6321db1 ("arm64: dts: qcom:
sc7180: Add required-opps for USB"))
Rajendra, shouldn't SC7180 GCC have PM ops to make sure a vote
is only there when AP is active? Are all GDSCs powered by CX?
If not, wouldn't this also need power-domain-names to
facilitate e.g. potential MX-powered ones?
Konrad
> .../devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> index 06dce0c6b7d0..8bf9b6f49550 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> @@ -32,6 +32,10 @@ properties:
> - const: bi_tcxo_ao
> - const: sleep_clk
>
> + power-domains:
> + items:
> + - description: CX domain
> +
> required:
> - compatible
> - clocks
> @@ -45,6 +49,8 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> clock-controller@100000 {
> compatible = "qcom,gcc-sc7180";
> reg = <0x00100000 0x1f0000>;
> @@ -52,6 +58,7 @@ examples:
> <&rpmhcc RPMH_CXO_CLK_A>,
> <&sleep_clk>;
> clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
> + power-domains = <&rpmhpd SC7180_CX>;
> #clock-cells = <1>;
> #reset-cells = <1>;
> #power-domain-cells = <1>;
