[PATCH 27/40] dt-bindings: pinctrl: qcom,sdm670-tlmm: simplify with unevaluatedProperties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All Qualcomm SoC Top Level Mode Multiplexer pin controllers have similar
capabilities regarding pin properties, thus we can just accept entire
set provided by qcom,tlmm-common.yaml schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 .../bindings/pinctrl/qcom,sdm670-tlmm.yaml           | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
index f586b3aa138e..84a15f77e710 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -58,6 +58,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -94,20 +95,9 @@ $defs:
                 uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
                 vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
 
-
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux