On Fri, Feb 03, 2023 at 01:21:18PM +0100, Petr Vorel wrote:
> From: Petr Vorel <petr.vorel@xxxxxxxxx>
>
Please add a commit message...
> Signed-off-by: Petr Vorel <petr.vorel@xxxxxxxxx>
> ---
> Hi all,
>
> please what is the mapping of qcom,init-current from downstream to
> mainline? Or is it not used at all?
>
It affects the mode the regulator operates in, you can find
regulator-system-load in a few cases in other files as reference for
when we force things into "high performance mode".
There are some cases, such as eMMC/uSD where problems has been seen when
the regulator is allowed to operate in low power mode...
> Also, how can I verify these connections in downstream DTB?
> vdd_l1-supply = <&pm8994_s1>;
> vdd_l2_26_28-supply = <&pm8994_s3>;
I don't think you can, without form of hardware documentation.
I _think_ the RPM will take care of dependencies for you, and care
should be taken before changing many of the regulators...
So I'd suggest that you simply introduce the regulators that you need to
touch from Linux today, rather than trying to add them all at once and
then build from there.
Regards,
Bjorn
> ...
>
> Thanks for info.
>
> Kind regards,
> Petr
>
> Downstream
> rpm-regulator-smpa1 {
> status = "okay";
> qcom,hpm-min-load = <0x186a0>;
> qcom,regulator-type = <0x01>;
> qcom,resource-id = <0x01>;
> qcom,resource-name = "smpa";
> compatible = "qcom,rpm-smd-regulator-resource";
>
> regulator-s1-corner-ao {
> phandle = <0xba>;
> linux,phandle = <0xba>;
> qcom,proxy-consumer-voltage = <0x07 0x07>;
> proxy-supply = <0xba>;
> qcom,use-voltage-corner;
> qcom,init-voltage-corner = <0x06>;
> regulator-always-on;
> regulator-max-microvolt = <0x07>;
> regulator-min-microvolt = <0x04>;
> qcom,set = <0x01>;
> regulator-name = "pm8994_s1_corner_ao";
> compatible = "qcom,rpm-smd-regulator";
> };
>
> regulator-s1-floor-corner {
> phandle = <0x16c>;
> linux,phandle = <0x16c>;
> qcom,always-send-voltage;
> qcom,use-voltage-floor-corner;
> regulator-max-microvolt = <0x07>;
> regulator-min-microvolt = <0x01>;
> qcom,set = <0x03>;
> regulator-name = "pm8994_s1_floor_corner";
> compatible = "qcom,rpm-smd-regulator";
> };
>
> regulator-s1-corner {
> phandle = <0xf3>;
> linux,phandle = <0xf3>;
> qcom,use-voltage-corner;
> regulator-max-microvolt = <0x07>;
> regulator-min-microvolt = <0x01>;
> qcom,set = <0x03>;
> regulator-name = "pm8994_s1_corner";
> compatible = "qcom,rpm-smd-regulator";
> };
>
> regulator-s1 {
> status = "disabled";
> qcom,set = <0x03>;
> regulator-name = "pm8994_s1";
> compatible = "qcom,rpm-smd-regulator";
> };
> };
> /* ... */
> rpm-regulator-smpb1 {
> status = "okay";
> qcom,hpm-min-load = <0x186a0>;
> qcom,regulator-type = <0x01>;
> qcom,resource-id = <0x01>;
> qcom,resource-name = "smpb";
> compatible = "qcom,rpm-smd-regulator-resource";
>
> regulator-s1 {
> qcom,init-voltage = <0xfa3e8>;
> regulator-max-microvolt = <0xfa3e8>;
> regulator-min-microvolt = <0xfa3e8>;
> status = "okay";
> qcom,set = <0x03>;
> regulator-name = "pmi8994_s1";
> compatible = "qcom,rpm-smd-regulator";
> };
> };
> /* ... */
> rpm-regulator-ldoa1 {
> status = "okay";
> qcom,hpm-min-load = <0x2710>;
> qcom,regulator-type = <0x00>;
> qcom,resource-id = <0x01>;
> qcom,resource-name = "ldoa";
> compatible = "qcom,rpm-smd-regulator-resource";
>
> regulator-l1 {
> qcom,init-voltage = <0xf4240>;
> regulator-max-microvolt = <0xf4240>;
> regulator-min-microvolt = <0xf4240>;
> status = "okay";
> qcom,set = <0x03>;
> regulator-name = "pm8994_l1";
> compatible = "qcom,rpm-smd-regulator";
> };
> };
>
> .../qcom/msm8994-huawei-angler-rev-101.dts | 267 ++++++++++++++++++
> 1 file changed, 267 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
> index 29e79ae0849d..cdd6f58efdf0 100644
> --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
> @@ -59,6 +59,273 @@ &tlmm {
> gpio-reserved-ranges = <85 4>;
> };
>
> +&rpm_requests {
> + pm8994_regulators: regulators-0 {
> + compatible = "qcom,rpm-pm8994-regulators";
> +
> + vdd_l1-supply = <&pm8994_s1>;
> + vdd_l2_26_28-supply = <&pm8994_s3>;
> + vdd_l3_11-supply = <&pm8994_s3>;
> + vdd_l4_27_31-supply = <&pm8994_s3>;
> + vdd_l5_7-supply = <&pm8994_s3>;
> + vdd_l6_12_32-supply = <&pm8994_s5>;
> + vdd_l8_16_30-supply = <&vph_pwr>;
> + vdd_l9_10_18_22-supply = <&vph_pwr>;
> + vdd_l13_19_23_24-supply = <&vph_pwr>;
> + vdd_l14_15-supply = <&pm8994_s5>;
> + vdd_l17_29-supply = <&vph_pwr>;
> + vdd_l20_21-supply = <&vph_pwr>;
> + vdd_l25-supply = <&pm8994_s5>;
> + vdd_lvs1_2-supply = <&pm8994_s4>;
> +
> + /* S1, S2, S6 and S12 are managed by RPMPD */
> +
> + pm8994_s1: s1 {
> + regulator-min-microvolt = <1025000>;
> + regulator-max-microvolt = <1025000>;
> + };
> +
> + pm8994_s2: s2 {
> + /* TODO */
> + };
> +
> + pm8994_s3: s3 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + pm8994_s4: s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-allow-set-load;
> + regulator-system-load = <325000>;
> + };
> +
> + pm8994_s5: s5 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> + };
> +
> + pm8994_s7: s7 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
> + /*
> + * TODO: pm8994_s8 and pm8994_s11 (pm8994_s9 and pm8994_s11 are missing)
> + spm-regulator@2900 {
> + phandle = <0x193>;
> + linux,phandle = <0x193>;
> + qcom,cpu-num = <0x00>;
> + regulator-max-microvolt = <0x120160>;
> + regulator-min-microvolt = <0xaae60>;
> + regulator-name = "pm8994_s8";
> + reg = <0x2900 0x100>;
> + compatible = "qcom,spm-regulator";
> + };
> +
> + spm-regulator@3200 {
> + phandle = <0x195>;
> + linux,phandle = <0x195>;
> + qcom,cpu-num = <0x04>;
> + regulator-max-microvolt = <0x12b128>;
> + regulator-min-microvolt = <0xaae60>;
> + regulator-name = "pm8994_s11";
> + reg = <0x3200 0x100>;
> + compatible = "qcom,spm-regulator";
> + };
> + */
> +
> + pm8994_l1: l1 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + pm8994_l2: l2 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + };
> +
> + pm8994_l3: l3 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + };
> +
> + pm8994_l4: l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + /* L5 is inaccessible from RPM */
> +
> + pm8994_l6: l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + /* L7 is inaccessible from RPM */
> +
> + pm8994_l8: l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l9: l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l10: l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l11: l11 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pm8994_l12: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l13: l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + pm8994_l14: l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l15: l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l16: l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + pm8994_l17: l17 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + pm8994_l18: l18 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> +
> + pm8994_l19: l19 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8994_l20: l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-allow-set-load;
> + regulator-system-load = <570000>;
> + /*
> + * TODO: downstream
> + * qcom,init-current = <0x2ee>;
> + */
> + };
> +
> + pm8994_l21: l21 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-always-on;
> + };
> +
> + pm8994_l22: l22 {
> + regulator-min-microvolt = <3100000>;
> + regulator-max-microvolt = <3100000>;
> + };
> +
> + pm8994_l23: l23 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + pm8994_l24: l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3150000>;
> + };
> +
> + pm8994_l25: l25 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pm8994_l26: l26 {
> + regulator-min-microvolt = <987500>;
> + regulator-max-microvolt = <987500>;
> + };
> +
> + pm8994_l27: l27 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8994_l28: l28 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-boot-on;
> + /*
> + * TODO: downstream
> + * qcom,init-current = <0x2d>;
> + */
> + };
> +
> + pm8994_l29: l29 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + pm8994_l30: l30 {
> + regulator-min-microvolt = <1850000>;
> + regulator-max-microvolt = <1850000>;
> + };
> +
> + pm8994_l31: l31 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-boot-on;
> + /*
> + * TODO: downstream
> + * qcom,init-current = <50>;
> + */
> + };
> +
> + pm8994_l32: l32 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + };
> +
> + pmi8994_regulators: regulators-1 {
> + compatible = "qcom,rpm-pmi8994-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_bst_byp-supply = <&vph_pwr>;
> +
> + pmi8994_s1: s1 {};
> +
> + /* S2 & S3 - VDD_GFX */
> +
> + pmi8994_bby: boost-bypass {};
> + };
> +};
> +
> &sdhc1 {
> status = "okay";
> mmc-hs400-1_8v;
> --
> 2.39.1
>
