[PATCH v2 2/2] irqchip: irq-qcom-mpm: Support passing a slice of SRAM as reg space

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The MPM hardware is accessible to us from the ARM CPUs through a shared
memory region (RPM MSG RAM) that's also concurrently accessed by other
kinds of cores on the system (like modem, ADSP etc.). Modeling this
relation in a (somewhat) sane manner in the device tree basically
requires us to either present the MPM as a child of said memory region
(which makes little sense, as a mapped memory carveout is not a bus),
define nodes which bleed their register spaces into one another, or
passing their slice of the MSG RAM through some kind of a property.

Go with the third option and add a way to map a region passed through
the "qcom,rpm-msg-ram" property as our register space.

The current way of using 'reg' is preserved for ABI reasons.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/irqchip/irq-qcom-mpm.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-qcom-mpm.c b/drivers/irqchip/irq-qcom-mpm.c
index d30614661eea..ee5f39a4a42a 100644
--- a/drivers/irqchip/irq-qcom-mpm.c
+++ b/drivers/irqchip/irq-qcom-mpm.c
@@ -14,6 +14,7 @@
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
@@ -322,8 +323,10 @@ static int qcom_mpm_init(struct device_node *np, struct device_node *parent)
 	struct device *dev = &pdev->dev;
 	struct irq_domain *parent_domain;
 	struct generic_pm_domain *genpd;
+	struct device_node *msgram_np;
 	struct qcom_mpm_priv *priv;
 	unsigned int pin_cnt;
+	struct resource res;
 	int i, irq;
 	int ret;
 
@@ -374,9 +377,21 @@ static int qcom_mpm_init(struct device_node *np, struct device_node *parent)
 
 	raw_spin_lock_init(&priv->lock);
 
-	priv->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(priv->base))
-		return PTR_ERR(priv->base);
+	/* If we have a handle to an RPM message ram partition, use it. */
+	msgram_np = of_parse_phandle(np, "qcom,rpm-msg-ram", 0);
+	if (msgram_np) {
+		ret = of_address_to_resource(msgram_np, 0, &res);
+		/* Don't use devm_ioremap_resource, as we're accessing a shared region. */
+		priv->base = devm_ioremap(dev, res.start, resource_size(&res));
+		of_node_put(msgram_np);
+		if (IS_ERR(priv->base))
+			return PTR_ERR(priv->base);
+	} else {
+		/* Otherwise, fall back to simple MMIO. */
+		priv->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(priv->base))
+			return PTR_ERR(priv->base);
+	}
 
 	for (i = 0; i < priv->reg_stride; i++) {
 		qcom_mpm_write(priv, MPM_REG_ENABLE, i, 0);

-- 
2.40.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux