Re: [PATCH v2 08/22] arm64: dts: qcom: pmk8350: rename PMK8350_SID to PMIC_SID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2.04.2023 00:07, Dmitry Baryshkov wrote:
> Several next patches are going to introduce flexibility into several
> other PMICs in order to support variable SID and node labels. This will
> result in close duplication of several similar preprocessor
> constructions. Having a 
drop the 'a'

per-PMIC defines would be error prone and can
> result in hard-to-notices
hard-to-notice

 mistakes. Thus rename PMK8350_SID to a generic
> PMIC_SID.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/pmk8350.dtsi         | 20 ++++++++++---------
>  .../qcom/sm6375-sony-xperia-murray-pdx225.dts |  7 ++++---
>  .../boot/dts/qcom/sm7225-fairphone-fp4.dts    |  6 +++---
>  3 files changed, 18 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
> index 26e40dbfc173..02e7518ab57b 100644
> --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
> @@ -9,14 +9,14 @@
>  #include <dt-bindings/spmi/spmi.h>
>  
>  /* (Sadly) this PMIC can be configured to be at different SIDs */
> -#ifndef PMK8350_SID
> -	#define PMK8350_SID 0
> +#ifndef PMIC_SID
> +	#define PMIC_SID 0
>  #endif
>  
>  &spmi_bus {
> -	pmk8350: pmic@PMK8350_SID {
> +	pmk8350: pmic@PMIC_SID {
>  		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
> -		reg = <PMK8350_SID SPMI_USID>;
> +		reg = <PMIC_SID SPMI_USID>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> @@ -27,14 +27,14 @@ pmk8350_pon: pon@1300 {
>  
>  			pmk8350_pon_pwrkey: pwrkey {
>  				compatible = "qcom,pmk8350-pwrkey";
> -				interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
> +				interrupts = <PMIC_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
>  				linux,code = <KEY_POWER>;
>  				status = "disabled";
>  			};
>  
>  			pmk8350_pon_resin: resin {
>  				compatible = "qcom,pmk8350-resin";
> -				interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
> +				interrupts = <PMIC_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
>  				status = "disabled";
>  			};
>  		};
> @@ -44,14 +44,14 @@ pmk8350_vadc: adc@3100 {
>  			reg = <0x3100>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +			interrupts = <PMIC_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>  			#io-channel-cells = <1>;
>  		};
>  
>  		pmk8350_adc_tm: adc-tm@3400 {
>  			compatible = "qcom,adc-tm7";
>  			reg = <0x3400>;
> -			interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
> +			interrupts = <PMIC_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			#thermal-sensor-cells = <1>;
> @@ -62,7 +62,7 @@ pmk8350_rtc: rtc@6100 {
>  			compatible = "qcom,pmk8350-rtc";
>  			reg = <0x6100>, <0x6200>;
>  			reg-names = "rtc", "alarm";
> -			interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
> +			interrupts = <PMIC_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
>  			status = "disabled";
>  		};
>  
> @@ -86,3 +86,5 @@ pmk8350_gpios: gpio@b000 {
>  		};
>  	};
>  };
> +
> +#undef PMIC_SID
> diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
> index b691c3834b6b..863fc1f4b0b6 100644
> --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
> @@ -5,13 +5,14 @@
>  
>  /dts-v1/;
>  
> -/* PMK8350 is configured to use SID6 instead of 0 */
> -#define PMK8350_SID 6
> -
>  #include <dt-bindings/gpio/gpio.h>
>  #include "sm6375.dtsi"
>  #include "pm6125.dtsi"
> +
> +/* PMK8350 is configured to use SID6 instead of 0 */
> +#define PMIC_SID 6
>  #include "pmk8350.dtsi"
> +
>  #include "pmr735a.dtsi"
>  
>  /* PM6125 PON is used and we can't have duplicate labels */
> diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> index af6cf4fbddc7..965b37245007 100644
> --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> @@ -5,9 +5,6 @@
>  
>  /dts-v1/;
>  
> -/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
> -#define PMK8350_SID 6
> -
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
>  #include <dt-bindings/input/input.h>
> @@ -18,6 +15,9 @@
>  #include "pm6150l.dtsi"
>  #include "pm6350.dtsi"
>  #include "pm7250b.dtsi"
> +
> +/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
> +#define PMIC_SID 6
>  #include "pmk8350.dtsi"
>  
>  / {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux