[PATCH v2 08/22] arm64: dts: qcom: pmk8350: rename PMK8350_SID to PMIC_SID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Several next patches are going to introduce flexibility into several
other PMICs in order to support variable SID and node labels. This will
result in close duplication of several similar preprocessor
constructions. Having a per-PMIC defines would be error prone and can
result in hard-to-notices mistakes. Thus rename PMK8350_SID to a generic
PMIC_SID.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi         | 20 ++++++++++---------
 .../qcom/sm6375-sony-xperia-murray-pdx225.dts |  7 ++++---
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    |  6 +++---
 3 files changed, 18 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 26e40dbfc173..02e7518ab57b 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -9,14 +9,14 @@
 #include <dt-bindings/spmi/spmi.h>
 
 /* (Sadly) this PMIC can be configured to be at different SIDs */
-#ifndef PMK8350_SID
-	#define PMK8350_SID 0
+#ifndef PMIC_SID
+	#define PMIC_SID 0
 #endif
 
 &spmi_bus {
-	pmk8350: pmic@PMK8350_SID {
+	pmk8350: pmic@PMIC_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
-		reg = <PMK8350_SID SPMI_USID>;
+		reg = <PMIC_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -27,14 +27,14 @@ pmk8350_pon: pon@1300 {
 
 			pmk8350_pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
-				interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMIC_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
 
 			pmk8350_pon_resin: resin {
 				compatible = "qcom,pmk8350-resin";
-				interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				interrupts = <PMIC_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
 				status = "disabled";
 			};
 		};
@@ -44,14 +44,14 @@ pmk8350_vadc: adc@3100 {
 			reg = <0x3100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMIC_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#io-channel-cells = <1>;
 		};
 
 		pmk8350_adc_tm: adc-tm@3400 {
 			compatible = "qcom,adc-tm7";
 			reg = <0x3400>;
-			interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMIC_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#thermal-sensor-cells = <1>;
@@ -62,7 +62,7 @@ pmk8350_rtc: rtc@6100 {
 			compatible = "qcom,pmk8350-rtc";
 			reg = <0x6100>, <0x6200>;
 			reg-names = "rtc", "alarm";
-			interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PMIC_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
 			status = "disabled";
 		};
 
@@ -86,3 +86,5 @@ pmk8350_gpios: gpio@b000 {
 		};
 	};
 };
+
+#undef PMIC_SID
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b691c3834b6b..863fc1f4b0b6 100644
--- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -5,13 +5,14 @@
 
 /dts-v1/;
 
-/* PMK8350 is configured to use SID6 instead of 0 */
-#define PMK8350_SID 6
-
 #include <dt-bindings/gpio/gpio.h>
 #include "sm6375.dtsi"
 #include "pm6125.dtsi"
+
+/* PMK8350 is configured to use SID6 instead of 0 */
+#define PMIC_SID 6
 #include "pmk8350.dtsi"
+
 #include "pmr735a.dtsi"
 
 /* PM6125 PON is used and we can't have duplicate labels */
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index af6cf4fbddc7..965b37245007 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -5,9 +5,6 @@
 
 /dts-v1/;
 
-/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
-#define PMK8350_SID 6
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/input/input.h>
@@ -18,6 +15,9 @@
 #include "pm6150l.dtsi"
 #include "pm6350.dtsi"
 #include "pm7250b.dtsi"
+
+/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
+#define PMIC_SID 6
 #include "pmk8350.dtsi"
 
 / {
-- 
2.30.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux