Re: [PATCH 2/2] ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 31.03.2023 16:59, Manivannan Sadhasivam wrote:
> To align with rest of the devicetree files, let's move the "status"
> property to the end of the nodes.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  .../boot/dts/qcom-sdx55-telit-fn980-tlb.dts   | 20 ++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
> index b73b707342af..91d13c40496c 100644
> --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
> +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
> @@ -243,21 +243,21 @@ &ipa {
>  };
>  
>  &pcie_phy {
> -	status = "okay";
> -
>  	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
>  	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
> -};
>  
> -&pcie_ep {
>  	status = "okay";
> +};
>  
> +&pcie_ep {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
>  		     &pcie_ep_wake_default>;
>  
>  	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
>  	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
> +
> +	status = "okay";
>  };
>  
>  &qpic_bam {
> @@ -265,8 +265,6 @@ &qpic_bam {
>  };
>  
>  &qpic_nand {
> -	status = "okay";
> -
>  	nand@0 {
>  		reg = <0>;
>  
> @@ -277,11 +275,13 @@ nand@0 {
>  		secure-regions = /bits/ 64 <0x500000 0x500000
>  					    0xa00000 0xb00000>;
>  	};
> +
> +	status = "okay";
Did you compiletest this?

Konrad
>  };
>  
>  &remoteproc_mpss {
> -	status = "okay";
>  	memory-region = <&mpss_adsp_mem>;
> +	status = "okay";
>  };
>  
>  &tlmm {
> @@ -308,16 +308,18 @@ pcie_ep_wake_default: pcie-ep-wake-default-state {
>  };
>  
>  &usb_hsphy {
> -	status = "okay";
>  	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
>  	vdda33-supply = <&vreg_l10e_3p1>;
>  	vdda18-supply = <&vreg_l5e_bb_1p7>;
> +
> +	status = "okay";
>  };
>  
>  &usb_qmpphy {
> -	status = "okay";
>  	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
>  	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
> +
> +	status = "okay";
>  };
>  
>  &usb {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux