On Wed, Mar 22, 2023 at 12:35:29PM -0500, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> > --- > Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml | 4 ++-- > Documentation/devicetree/bindings/i2c/apple,i2c.yaml | 4 ++-- > Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml | 2 +- > Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml | 4 ++-- > Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml | 4 ++-- > Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 4 ++-- > Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 2 +- Reviewed-by: Alain Volmat <alain.volmat@xxxxxxxxxxx> > .../devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 ++-- > 8 files changed, 14 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml > index 199a354ccb97..26bed558c6b8 100644 > --- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml > @@ -2,8 +2,8 @@ > # Copyright 2019 BayLibre, SAS > %YAML 1.2 > --- > -$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"; > -$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > +$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > title: Amlogic Meson I2C Controller > > diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml > index 4ac61fec90e2..243da7003cec 100644 > --- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml > @@ -1,8 +1,8 @@ > # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > %YAML 1.2 > --- > -$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"; > -$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > +$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > title: Apple/PASemi I2C controller > > diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml > index ea2303c0e143..6adedd3ec399 100644 > --- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml > @@ -75,7 +75,7 @@ required: > - clocks > > allOf: > - - $ref: "i2c-controller.yaml" > + - $ref: i2c-controller.yaml > - if: > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml > index 2e95cda7262a..7a675aa08c44 100644 > --- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml > +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml > @@ -1,8 +1,8 @@ > # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > %YAML 1.2 > --- > -$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"; > -$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > +$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > title: Cadence I2C controller > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml > index 6e0a5686af04..f34cc7ad5a00 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml > @@ -45,7 +45,7 @@ properties: > > i2c-parent: > description: phandle of the I2C bus that this multiplexer's master-side port is connected to > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > mux-gpios: > description: list of GPIOs used to control the muxer > @@ -55,7 +55,7 @@ properties: > idle-state: > description: Value to set the muxer to when idle. When no value is given, it defaults to the > last value used. > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > > allOf: > - $ref: i2c-mux.yaml > diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > index 0e88c85985b5..9f66a3bb1f80 100644 > --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > @@ -1,8 +1,8 @@ > # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > %YAML 1.2 > --- > -$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"; > -$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > +$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > title: Qualcomm Geni based QUP I2C Controller > > diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml > index bf396e9466aa..94b75d9f66cd 100644 > --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml > @@ -90,7 +90,7 @@ properties: > st,syscfg-fmp: > description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode > Plus speed is selected by slave. > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > - items: > - description: phandle to syscfg > diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml > index 1b598638d457..658ae92fa86d 100644 > --- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml > +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml > @@ -1,8 +1,8 @@ > # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > %YAML 1.2 > --- > -$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"; > -$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > +$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > title: Xilinx IIC controller > > -- > 2.39.2 > > _______________________________________________ > Linux-stm32 mailing list > Linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx > https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32 Regards, Alain
