Re: [PATCH 2/3] arm64: dts: qcom: sc8280xp-x13s: add wifi calibration variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 20, 2023 at 5:52 AM Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
>
> Describe the bus topology for PCIe domain 6 and add the ath11k
> calibration variant so that the board file (calibration data) can be
> loaded.
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216246
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts  | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 150f51f1db37..0051025e0aa8 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -711,6 +711,23 @@ &pcie4 {
>         pinctrl-0 = <&pcie4_default>;
>
>         status = "okay";
> +
> +       pcie@0 {
> +               device_type = "pci";
> +               reg = <0x0 0x0 0x0 0x0 0x0>;
> +               #address-cells = <3>;
> +               #size-cells = <2>;
> +               ranges;
> +
> +               bus-range = <0x01 0xff>;
> +
> +               wifi@0 {
> +                       compatible = "pci17cb,1103";
> +                       reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +                       qcom,ath11k-calibration-variant = "LE_X13S";
> +               };
> +       };
>  };
>
>  &pcie4_phy {
> --
> 2.39.2
>

So glad to finally see this and confirm that it works!

Tested-by: Steev Klimaszewski <steev@xxxxxxxx> #Thinkpad X13s




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux