On 10/04/15 18:04, Stephen Boyd wrote:
On 04/10/15 05:34, Srinivas Kandagatla wrote:
@@ -250,6 +265,18 @@
};
};
+ ext_3p3v: regulator-fixed@1 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ext_3p3v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
This shouldn't be inside the SoC node because it doesn't have a reg
property. It should be in a 'regulators' node that's in the root of the
tree:
Is this new DT requirement/style? I have not noticed such a dt style in
the past. I might have missed it. Any advantage of doing this way?
regulators {
compatible = "simple-bus";
ext_3p3v: fixedregulator@0 {
compatible = "regulator-fixed";
...
};
};
I will move this to the suggested style in next version.
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
@@ -522,5 +549,82 @@
compatible = "qcom,tcsr-apq8064", "syscon";
reg = <0x1a400000 0x100>;
};
+
+ hdmi: qcom,hdmi-tx@4a00000 {
+ compatible = "qcom,hdmi-tx-8960";
+ reg-names = "core_physical";
+ reg = <0x04a00000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_NONE>;
+ clock-names =
+ "core_clk",
+ "master_iface_clk",
+ "slave_iface_clk";
+ clocks =
+ <&mmcc HDMI_APP_CLK>,
+ <&mmcc HDMI_M_AHB_CLK>,
+ <&mmcc HDMI_S_AHB_CLK>;
+ qcom,hdmi-tx-ddc-clk = <&tlmm_pinmux 70
+ GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-ddc-data = <&tlmm_pinmux 71
+ GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-hpd = <&tlmm_pinmux 72
+ GPIO_ACTIVE_HIGH>;
This should be done via the *-gpios method. i.e. hdmi-tx-ddc-clk-gpios,
hdmi-tx-ddc-data-gpios, etc.
Thanks for the inputs,
That's true, These are existing bindings, so I can't change it as part
of this patch, However I will make another patch to fix this in both
drivers and DT for good reasons. Just noticed that bindings are not
consistent with the examples and the driver, which I guess is another issue.
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ hdmi-mux-supply = <&ext_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pinctrl>;
+ };
+
+ gpu: qcom,adreno-3xx@4300000 {
+ compatible = "qcom,adreno-3xx";
+ reg = <0x04300000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 80 IRQ_TYPE_NONE>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "mem_clk",
+ "mem_iface_clk";
+ clocks =
+ <&mmcc GFX3D_CLK>,
+ <&mmcc GFX3D_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>,
+ <&mmcc MMSS_IMEM_AHB_CLK>;
+ qcom,chipid = <0x03020002>;
+ qcom,gpu-pwrlevels {
+ compatible = "qcom,gpu-pwrlevels";
+ qcom,gpu-pwrlevel@0 {
+ qcom,gpu-freq = <450000000>;
+ };
+ qcom,gpu-pwrlevel@1 {
+ qcom,gpu-freq = <27000000>;
+ };
+ };
This should be an OPP.
Yes, that looks reasonable approch, But as I said before the driver and
the bindings are still using this style, so I cant change this as part
of this patch. I will create another patch to for better bindings with
driver fixes too.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
