On 04/10/15 05:34, Srinivas Kandagatla wrote:
> @@ -250,6 +265,18 @@
> };
> };
>
> + ext_3p3v: regulator-fixed@1 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "ext_3p3v";
> + regulator-type = "voltage";
> + startup-delay-us = <0>;
> + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-boot-on;
> + };
This shouldn't be inside the SoC node because it doesn't have a reg
property. It should be in a 'regulators' node that's in the root of the
tree:
regulators {
compatible = "simple-bus";
ext_3p3v: fixedregulator@0 {
compatible = "regulator-fixed";
...
};
};
> +
> qcom,ssbi@500000 {
> compatible = "qcom,ssbi";
> reg = <0x00500000 0x1000>;
> @@ -522,5 +549,82 @@
> compatible = "qcom,tcsr-apq8064", "syscon";
> reg = <0x1a400000 0x100>;
> };
> +
> + hdmi: qcom,hdmi-tx@4a00000 {
> + compatible = "qcom,hdmi-tx-8960";
> + reg-names = "core_physical";
> + reg = <0x04a00000 0x1000>;
> + interrupts = <GIC_SPI 79 IRQ_TYPE_NONE>;
> + clock-names =
> + "core_clk",
> + "master_iface_clk",
> + "slave_iface_clk";
> + clocks =
> + <&mmcc HDMI_APP_CLK>,
> + <&mmcc HDMI_M_AHB_CLK>,
> + <&mmcc HDMI_S_AHB_CLK>;
> + qcom,hdmi-tx-ddc-clk = <&tlmm_pinmux 70
> + GPIO_ACTIVE_HIGH>;
> + qcom,hdmi-tx-ddc-data = <&tlmm_pinmux 71
> + GPIO_ACTIVE_HIGH>;
> + qcom,hdmi-tx-hpd = <&tlmm_pinmux 72
> + GPIO_ACTIVE_HIGH>;
This should be done via the *-gpios method. i.e. hdmi-tx-ddc-clk-gpios,
hdmi-tx-ddc-data-gpios, etc.
> + core-vdda-supply = <&pm8921_hdmi_switch>;
> + hdmi-mux-supply = <&ext_3p3v>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_pinctrl>;
> + };
> +
> + gpu: qcom,adreno-3xx@4300000 {
> + compatible = "qcom,adreno-3xx";
> + reg = <0x04300000 0x20000>;
> + reg-names = "kgsl_3d0_reg_memory";
> + interrupts = <GIC_SPI 80 IRQ_TYPE_NONE>;
> + interrupt-names = "kgsl_3d0_irq";
> + clock-names =
> + "core_clk",
> + "iface_clk",
> + "mem_clk",
> + "mem_iface_clk";
> + clocks =
> + <&mmcc GFX3D_CLK>,
> + <&mmcc GFX3D_AHB_CLK>,
> + <&mmcc GFX3D_AXI_CLK>,
> + <&mmcc MMSS_IMEM_AHB_CLK>;
> + qcom,chipid = <0x03020002>;
> + qcom,gpu-pwrlevels {
> + compatible = "qcom,gpu-pwrlevels";
> + qcom,gpu-pwrlevel@0 {
> + qcom,gpu-freq = <450000000>;
> + };
> + qcom,gpu-pwrlevel@1 {
> + qcom,gpu-freq = <27000000>;
> + };
> + };
This should be an OPP.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
