On 2023. 03. 07. 20:02, Konrad Dybcio wrote:
On 7.03.2023 19:59, Gergo Koteles wrote:
The OnePlus 6/6T both have a NQ330 (PN553 + P73N2M0).
The PN533 supported by the nxp-nci-i2c driver in mainline.
It detects/reads NFC tags using "nfctool".
Signed-off-by: Gergo Koteles <soyer@xxxxxx>
---
Next time include a changelog below this --- line detailing
what changed between revisions.
Okey. Thanks for the suggestion and the review.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 64638ea94db7..5e45801031d8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -380,6 +380,24 @@ zap-shader {
};
};
+&i2c3 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ nfc@28 {
+ compatible = "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&nfc_int_active &nfc_enable_active &nfc_firmware_active>;
+ pinctrl-names = "default";
+ };
+};
+
&i2c10 {
status = "okay";
clock-frequency = <100000>;
@@ -753,6 +771,27 @@ &usb_1_hsphy {
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
+ nfc_int_active: nfc-int-active-state {
+ pins = "gpio63";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ nfc_enable_active: nfc-enable-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ nfc_firmware_active: nfc-firmware-active-state {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
tri_state_key_default: tri-state-key-default-state {
pins = "gpio40", "gpio42", "gpio26";
function = "gpio";
