Re: [PATCH 01/16] arm64: dts: qcom: sdm845: Fix the PCI I/O port range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 28, 2023, at 17:47, Manivannan Sadhasivam wrote:
> For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
> located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
> (0x60200000, 0x40200000) specified in the ranges property for I/O region.
> -			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
> -				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>;
> +			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
> +				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
> 

This fixes the offset, but I wonder if the size of the I/O
window should be changed as well. The normal size is 64KB
(0x10000) per bus or less, while this one has 1MB.

It's probably harmless since each device would only use
a few bytes, and most devices don't need any I/O ports
at all.

     Arnd



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux