Quoting Srinivasa Rao Mandadapu (2023-02-06 08:16:36)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 1810a36..5e99f49 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -107,3 +107,7 @@
> };
> };
> };
> +
> +&remoteproc_adsp {
> + status = "okay";
> +};
Sort this file by phandle alphabetically?
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 6908bca..27ab992 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -3439,6 +3441,97 @@
> status = "disabled";
> };
>
> + remoteproc_adsp: remoteproc@3000000 {
This should be sorted on physical address. I think the node above is
spi@88dc000 so this is in the wrong place.
> + compatible = "qcom,sc7280-adsp-pil";
> + reg = <0 0x03000000 0 0x5000>, <0 0x0355b000 0 0x10>;
> + reg-names = "qdsp6ss_base", "lpass_efuse";
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_NONE>,
Can these have proper irq flags? Doubtful they're IRQ_TYPE_NONE.
> + <&adsp_smp2p_in 1 IRQ_TYPE_NONE>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_NONE>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_NONE>,
> + <&adsp_smp2p_in 7 IRQ_TYPE_NONE>;
> +
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack",
> + "shutdown-ack";
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_CFG_NOC_LPASS_CLK>;
> +
Drop newline so clocks properties are together please.
> + clock-names = "xo", "gcc_cfg_noc_lpass";
> +
> + iommus = <&apps_smmu 0x1800 0x0>;
> +
> + power-domains = <&rpmhpd SC7280_CX>;
> + power-domain-names = "cx";
> +
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> + <&aoss_reset AOSS_CC_LPASS_RESTART>;
> +
Drop newline so reset properties are together please.
> + reset-names = "pdc_sync", "cc_lpass";
> + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
> +
> + memory-region = <&adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "lpass";
> + qcom,remote-pid = <2>;
> +
> + gpr {
This node name should be apr per the qcom,glink-edge.yaml binding?
> + compatible = "qcom,gpr";
> + qcom,glink-channels = "adsp_apps";
> + qcom,domain = <GPR_DOMAIN_ID_ADSP>;
> + qcom,intents = <512 20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + q6apm: service@1 {
> + compatible = "qcom,q6apm";
> + reg = <GPR_APM_MODULE_IID>;
> + #sound-dai-cells = <0>;
> +
> + q6apmdai: dais {
> + compatible = "qcom,q6apm-dais";
> + iommus = <&apps_smmu 0x1801 0x0>;
> + };
> +
> + q6apmbedai: bedais {
> + compatible = "qcom,q6apm-lpass-dais";
> + #sound-dai-cells = <1>;
> + };
> + };
> +
> + q6prm: service@2 {
> + compatible = "qcom,q6prm";
> + reg = <GPR_PRM_MODULE_IID>;
> +
> + q6prmcc: clock-controller {
> + compatible = "qcom,q6prm-lpass-clocks";
This is clk binding but not a clk driver? I'll look away now.
> + #clock-cells = <2>;
> + };
> + };
> + };
> + };
> + };
> +
