Add LPASS PIL node for sc7280 based audioreach platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
---
.../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 4 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 93 ++++++++++++++++++++++
2 files changed, 97 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
index 1810a36..5e99f49 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -107,3 +107,7 @@
};
};
};
+
+&remoteproc_adsp {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 6908bca..27ab992 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
@@ -21,6 +22,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
@@ -3439,6 +3441,97 @@
status = "disabled";
};
+ remoteproc_adsp: remoteproc@3000000 {
+ compatible = "qcom,sc7280-adsp-pil";
+ reg = <0 0x03000000 0 0x5000>, <0 0x0355b000 0 0x10>;
+ reg-names = "qdsp6ss_base", "lpass_efuse";
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 7 IRQ_TYPE_NONE>;
+
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack",
+ "shutdown-ack";
+
+ qcom,qmp = <&aoss_qmp>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CFG_NOC_LPASS_CLK>;
+
+ clock-names = "xo", "gcc_cfg_noc_lpass";
+
+ iommus = <&apps_smmu 0x1800 0x0>;
+
+ power-domains = <&rpmhpd SC7280_CX>;
+ power-domain-names = "cx";
+
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+ <&aoss_reset AOSS_CC_LPASS_RESTART>;
+
+ reset-names = "pdc_sync", "cc_lpass";
+ qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x1801 0x0>;
+ };
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
+ };
+ };
+
remoteproc_wpss: remoteproc@8a00000 {
compatible = "qcom,sc7280-wpss-pil";
reg = <0 0x08a00000 0 0x10000>;
--
2.7.4
