On Wed, Feb 1, 2023 at 4:21 PM Bartosz Golaszewski <brgl@xxxxxxxx> wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> > > This iteration contains a fixed DTS and all not already applied DT bindings > patches (with tags collected). > > v2 -> v3: > - reorder properties (reg always first, etc.) > - tweak node names > - remove properties filled in by the firmware > > v1 -> v2: > - lots of improvements all around the place to make the dts pass dtbs_check > (with some additional patches fixing bugs in existing dt bindings), > make dtbs W=1 and checkpatch.pl > - move board-specific properties to the board .dts file > - ordered top-level nodes alphabetically and sub-nodes by the reg property > - fixed licensing > - set #address-cells and #size-cells to <2> in the soc node and update sub-nodes > > Bartosz Golaszewski (5): > dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible > dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform > dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible > dt-bindings: arm: qcom: add the sa8775p-ride board > arm64: dts: qcom: add initial support for qcom sa8775p-ride > > .../devicetree/bindings/arm/qcom.yaml | 7 + > .../bindings/firmware/qcom,scm.yaml | 1 + > .../bindings/mailbox/qcom-ipcc.yaml | 1 + > .../bindings/watchdog/qcom-wdt.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 47 + > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 812 ++++++++++++++++++ > 7 files changed, 870 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts > create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi > > -- > 2.37.2 > Hey Bjorn, can you pick up this series as it looks like it's ready to go? Bart
