[PATCH v3 0/5] arm64: qcom: add initial support for qcom sa8775p-ride

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

This iteration contains a fixed DTS and all not already applied DT bindings
patches (with tags collected).

v2 -> v3:
- reorder properties (reg always first, etc.)
- tweak node names
- remove properties filled in by the firmware

v1 -> v2:
- lots of improvements all around the place to make the dts pass dtbs_check
  (with some additional patches fixing bugs in existing dt bindings),
  make dtbs W=1 and checkpatch.pl
- move board-specific properties to the board .dts file
- ordered top-level nodes alphabetically and sub-nodes by the reg property
- fixed licensing
- set #address-cells and #size-cells to <2> in the soc node and update sub-nodes

Bartosz Golaszewski (5):
  dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
  dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform
  dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
  dt-bindings: arm: qcom: add the sa8775p-ride board
  arm64: dts: qcom: add initial support for qcom sa8775p-ride

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 .../bindings/firmware/qcom,scm.yaml           |   1 +
 .../bindings/mailbox/qcom-ipcc.yaml           |   1 +
 .../bindings/watchdog/qcom-wdt.yaml           |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts     |  47 +
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         | 812 ++++++++++++++++++
 7 files changed, 870 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi

-- 
2.37.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux