On 2.02.2023 15:52, Kathiravan T wrote:
> APSS PLL found on the IPQ8074 and IPQ6018 are of type Huayra PLL. But,
> IPQ5332 APSS PLL is of type Stromer Plus. To accommodate both these PLLs,
> refactor the driver to take the clk_alpha_pll, alpha_pll_config via device
> data.
>
> Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
> ---
> drivers/clk/qcom/apss-ipq-pll.c | 55 +++++++++++++++++++++------------
> 1 file changed, 36 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> index a5aea27eb867..6e815e8b7fe4 100644
> --- a/drivers/clk/qcom/apss-ipq-pll.c
> +++ b/drivers/clk/qcom/apss-ipq-pll.c
> @@ -8,20 +8,22 @@
>
> #include "clk-alpha-pll.h"
>
> -static const u8 ipq_pll_offsets[] = {
> - [PLL_OFF_L_VAL] = 0x08,
> - [PLL_OFF_ALPHA_VAL] = 0x10,
> - [PLL_OFF_USER_CTL] = 0x18,
> - [PLL_OFF_CONFIG_CTL] = 0x20,
> - [PLL_OFF_CONFIG_CTL_U] = 0x24,
> - [PLL_OFF_STATUS] = 0x28,
> - [PLL_OFF_TEST_CTL] = 0x30,
> - [PLL_OFF_TEST_CTL_U] = 0x34,
> +static const u8 ipq_pll_offsets[][PLL_OFF_MAX_REGS] = {
> + [CLK_ALPHA_PLL_TYPE_HUAYRA] = {
Is it really huayra? The definition in clk-alpha-pll.c is
different..
Konrad
> + [PLL_OFF_L_VAL] = 0x08,
> + [PLL_OFF_ALPHA_VAL] = 0x10,
> + [PLL_OFF_USER_CTL] = 0x18,
> + [PLL_OFF_CONFIG_CTL] = 0x20,
> + [PLL_OFF_CONFIG_CTL_U] = 0x24,
> + [PLL_OFF_STATUS] = 0x28,
> + [PLL_OFF_TEST_CTL] = 0x30,
> + [PLL_OFF_TEST_CTL_U] = 0x34,
> + },
> };
>
> -static struct clk_alpha_pll ipq_pll = {
> +static struct clk_alpha_pll ipq_pll_huayra = {
> .offset = 0x0,
> - .regs = ipq_pll_offsets,
> + .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_HUAYRA],
> .flags = SUPPORTS_DYNAMIC_UPDATE,
> .clkr = {
> .enable_reg = 0x0,
> @@ -61,6 +63,21 @@ static const struct alpha_pll_config ipq8074_pll_config = {
> .test_ctl_hi_val = 0x4000,
> };
>
> +struct apss_pll_data {
> + struct clk_alpha_pll *pll;
> + const struct alpha_pll_config *pll_config;
> +};
> +
> +static struct apss_pll_data ipq8074_pll_data = {
> + .pll = &ipq_pll_huayra,
> + .pll_config = &ipq8074_pll_config,
> +};
> +
> +static struct apss_pll_data ipq6018_pll_data = {
> + .pll = &ipq_pll_huayra,
> + .pll_config = &ipq6018_pll_config,
> +};
> +
> static const struct regmap_config ipq_pll_regmap_config = {
> .reg_bits = 32,
> .reg_stride = 4,
> @@ -71,7 +88,7 @@ static const struct regmap_config ipq_pll_regmap_config = {
>
> static int apss_ipq_pll_probe(struct platform_device *pdev)
> {
> - const struct alpha_pll_config *ipq_pll_config;
> + const struct apss_pll_data *data;
> struct device *dev = &pdev->dev;
> struct regmap *regmap;
> void __iomem *base;
> @@ -85,23 +102,23 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> if (IS_ERR(regmap))
> return PTR_ERR(regmap);
>
> - ipq_pll_config = of_device_get_match_data(&pdev->dev);
> - if (!ipq_pll_config)
> + data = of_device_get_match_data(&pdev->dev);
> + if (!data)
> return -ENODEV;
>
> - clk_alpha_pll_configure(&ipq_pll, regmap, ipq_pll_config);
> + clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
>
> - ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
> + ret = devm_clk_register_regmap(dev, &data->pll->clkr);
> if (ret)
> return ret;
>
> return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> - &ipq_pll.clkr.hw);
> + &data->pll->clkr.hw);
> }
>
> static const struct of_device_id apss_ipq_pll_match_table[] = {
> - { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
> - { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config },
> + { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_data },
> + { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_data },
> { }
> };
> MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
