[PATCH v3 2/3] dt-bindings: thermal: qcom-spmi-adc-tm5: Use generic ADC node name

[Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>]

Update the example to reflect a future requirement for the generic
adc-chan node name on ADC channel nodes, while conveying the board name
of the channel in a label instead.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml   | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index 52ec18cf1eda..885c9e139848 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -178,10 +178,11 @@ examples:
             #io-channel-cells = <1>;
 
             /* Other properties are omitted */
-            conn-therm@4f {
+            adc-chan@4f {
                 reg = <ADC5_AMUX_THM3_100K_PU>;
                 qcom,ratiometric;
                 qcom,hw-settle-time = <200>;
+                label = "conn_therm";
             };
         };
 
@@ -217,16 +218,18 @@ examples:
             #io-channel-cells = <1>;
 
             /* Other properties are omitted */
-            xo-therm@44 {
+            adc-chan@44 {
                 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
                 qcom,ratiometric;
                 qcom,hw-settle-time = <200>;
+                label = "xo_therm";
             };
 
-            conn-therm@147 {
+            adc-chan@147 {
                 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
                 qcom,ratiometric;
                 qcom,hw-settle-time = <200>;
+                label = "conn_therm";
             };
         };
 
-- 
2.39.1