Re: [PATCH 2/2] arm64: dts: qcom: ipq8074: add QFPROM node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 22 Jan 2023 at 17:57, Kathiravan Thirumoorthy
<quic_kathirav@xxxxxxxxxxx> wrote:
>
>
> On 1/21/2023 4:53 PM, Robert Marko wrote:
> > IPQ8074 has efuses like other Qualcomm SoC-s that are required for
> > determining various HW quirks which will be required later for CPR etc,
> > so lets add the QFPROM node for start.
> >
> > Individidual fuses will be added as they are required.
> >
> > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/ipq8074.dtsi | 7 +++++++
> >   1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > index 8eba586065a3..f29491f647fe 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > @@ -301,6 +301,13 @@ mdio: mdio@90000 {
> >                       status = "disabled";
> >               };
> >
> > +             qfprom: efuse@a4000 {
> > +                     compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
> > +                     reg = <0x000a4000 0x1000>;
>
>
>  From the HW document, I see the overall size of this region is 0x2000,
> any reason to stick with 0x1000?

Like always, I dont have access to docs and 0x1000 is all I could find
downstream
being used.

Any chance you can share the regions inside of QFPROM, it would be great to use
the ECC corrected one if available.

Regards,
Robert
>
> Thanks, Kathiravan T.
>
>
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +             };
> > +
> >               prng: rng@e3000 {
> >                       compatible = "qcom,prng-ee";
> >                       reg = <0x000e3000 0x1000>;



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux