Re: [PATCH v3 3/7] arm64: dts: qcom: sc7280: Add LPASS PIL node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Add LPASS PIL node for sc7280 based audioreach platforms.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> ---
>  .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi  |  4 +
>  arch/arm64/boot/dts/qcom/sc7280.dtsi               | 95 ++++++++++++++++++++++
>  2 files changed, 99 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 7b3f7ee..81e0f3a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -107,3 +107,7 @@
>  		};
>  	};
>  };
> +
> +&remoteproc_adsp {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 6908bca..08142047 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
>  #include <dt-bindings/clock/qcom,gcc-sc7280.h>
>  #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
> +#include <dt-bindings/clock/qcom,lpass-sc7280.h>
>  #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
>  #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
> @@ -21,6 +22,7 @@
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/reset/qcom,sdm845-aoss.h>
>  #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +#include <dt-bindings/soc/qcom,gpr.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  #include <dt-bindings/sound/qcom,lpass.h>
>  #include <dt-bindings/thermal/thermal.h>
> @@ -3439,6 +3441,99 @@
>  			status = "disabled";
>  		};
>  
> +		remoteproc_adsp: remoteproc@3000000 {
> +			compatible = "qcom,sc7280-adsp-pil";
> +			reg = <0 0x03000000 0 0x5000>, <0 0x0355b000 0 0x10>;
> +			reg-names = "qdsp6ss_base", "lpass_efuse";
> +
> +			status = "disabled";

Status is always the last property.


Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux