Re: [RFC v4 0/5] Add multiport support for DWC3 controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jan 15, 2023 at 05:11:41PM +0530, Krishna Kurapati wrote:
> Currently the DWC3 driver supports only single port controller which
> requires at most two PHYs ie HS and SS PHYs. There are SoCs that has
> DWC3 controller with multiple ports that can operate in host mode.
> Some of the port supports both SS+HS and other port supports only HS
> mode.
> 
> This change primarily refactors the Phy logic in core driver to allow
> multiport support with Generic Phy's.
> 
> Chananges have been tested on  QCOM SoC SA8295P which has 4 ports (2
> are HS+SS capable and 2 are HS only capable).
> 

I can confirm that applying this series allow me to use all 6 USB ports
on the ADP. Looking forward to v5.

Thanks,
Bjorn

> Changes in v4:
> Added DT support for SA8295p.
> 
> Changes in v3:
> Incase any PHY init fails, then clear/exit the PHYs that
> are already initialized.
> 
> Changes in v2:
> Changed dwc3_count_phys to return the number of PHY Phandles in the node.
> This will be used now in dwc3_extract_num_phys to increment num_usb2_phy 
> and num_usb3_phy.
> 
> Added new parameter "ss_idx" in dwc3_core_get_phy_ny_node and changed its
> structure such that the first half is for HS-PHY and second half is for
> SS-PHY.
> 
> In dwc3_core_get_phy, for multiport controller, only if SS-PHY phandle is
> present, pass proper SS_IDX else pass -1.
> 
> Link to v3: https://lore.kernel.org/all/1654709787-23686-1-git-send-email-quic_harshq@xxxxxxxxxxx/#r
> Link to v2: https://lore.kernel.org/all/1653560029-6937-1-git-send-email-quic_harshq@xxxxxxxxxxx/#r
> 
> Krishna Kurapati (5):
>   dt-bindings: usb: Add bindings to support multiport properties
>   usb: dwc3: core: Refactor PHY logic to support Multiport Controller
>   usb: dwc3: core: Do not setup event buffers for host only controllers
>   usb: dwc3: qcom: Add multiport controller support for qcom wrapper
>   arm: dts: msm: Add multiport controller node for usb
> 
>  .../devicetree/bindings/usb/snps,dwc3.yaml    |  42 ++-
>  arch/arm64/boot/dts/qcom/sa8295p-adp.dts      |  49 +++
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |  60 ++++
>  drivers/usb/dwc3/core.c                       | 325 +++++++++++++-----
>  drivers/usb/dwc3/core.h                       |  15 +-
>  drivers/usb/dwc3/drd.c                        |  14 +-
>  drivers/usb/dwc3/dwc3-qcom.c                  |  28 +-
>  7 files changed, 429 insertions(+), 104 deletions(-)
> 
> -- 
> 2.39.0
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux